HBLT-Wire

New! Better, compact and more cost efficient the HBLT-Wire

Field adjustable capacitive liquid level sensor designed to measure refrigerant levels

Siutable for ammonia NH₃

Basic specifications

Suitable for ammonia and halocarbon refrigerants
Adjustable length: cut and configure wire from 300 to 4000 mm (12 to 157 in)
“Plug and Play” no requirement for re-calibration or dead zone optimization
Configure and calibrate using a free windows utility
“Service Friendly” electronic head and probe can be separated without emptying the vessel
One alarm output available
Physically backwardly compatible with Refrigerating Specialties Depth Probe Tracker and ELL probe models
Can be used w/o controller for basic level control

Technical Data

Liquid Temperature Range: -50°C to 100°C (-58°F to 212°F)
Ambient Temperature Range: During operation -30°C to 50°C (-22°F to 122°F)
Max Working Pressure: 100 bar (1450 psig)
Connection: HBLT-Wire-2: 3 ⁄4” NPT HBLT-Wire-6: 3 ⁄4” BSPP (1)
Wire Probe Length Range: 300 mm to 4000 mm (12” to 157”)
Supply Voltage and Load: 24V AC/DC ±10% (50/60 Hz) 1.5 W
Maximum Load Resistance: 500 ohm
Electronic Connection: M12, 5 pin - 5 m (196”) Long
Analog Output (3 - Wire): 4 - 20 mA (0 - 100%)
Alarm Range: 10% to 100%
Digital Output (Alarm Output): PNP , 1 A
Output Function (Programmable): Normally Open (NO) Normally Closed (NC)
LED Indication: • Calibration (yellow) • Power (green) • Alarm (red)
Protection Rating: IP65
Approvals: EMC Emission EN61000-3-2 EMC Immunity EN61000-4-2 GOST-R No. 0903044

Advantages

Easy installation of the probe “measure – cut – configure”
Flexible wire means installation height of only 6’’ is required/ makes for easy shipping
Proven sensing method increases system uptime
Features a ¾” NPT connection (BSPP also available) equals easy direct replacement of existing probes
Teflon sheathing: the probe does not require an additional support at the bottom of the stand pipe
Ideal for all liquid level measuring applications

Application